experimental identification

英 [ɪkˌsperɪˈmentl aɪˌdentɪfɪˈkeɪʃn] 美 [ɪkˌsperɪˈmentl aɪˌdentɪfɪˈkeɪʃn]

【计】试验性识别

计算机



双语例句

  1. Experimental Modal Parameters Identification of Oil-drilling Derrick under Ambient Random Excitation
    环境随机激励下在役石油钻机井架试验模态参数识别
  2. NONLINEAR WAVE IN A FLUID-FILLED THIN ELASTIC TUBE BURIED INSIDE ELASTIC FOUNDATION Analysis and experimental study on identification of inner force of steel tube under tension ( compression) and bending using blind-hole method
    弹性地基内充液压力管道中的非线性波盲孔法识别拉(压)弯钢管内力的分析与试验
  3. Experimental identification of modal density parameters of aluminum honeycomb sandwich panel;
    研究了正六角形蜂窝夹层板的非线性动力学问题。
  4. Experimental modal parameter identification of drilling derrick under ocean wave excitation
    基于海洋波浪脉动的海洋钻机井架结构试验模态识别
  5. Clinical significance of experimental isolation and identification in human streptococcus suis 2 infections
    实验分离、鉴定人感染猪链球菌2型的临床意义
  6. Experimental Study on Identification Method of Inertia Parameter of Powertrain Rigid Body
    动力总成刚体惯性参数识别的实验研究
  7. Theoretical analysis and experimental identification on the single-cylinder electrohydraulic servo vertical exciting system
    单缸电液伺服垂直激振系统的理论分析和实验识别
  8. Experimental Study on Identification of Salmonella Typhimurium Using Monoclonal Antibodies
    单克隆抗体鉴定鼠伤寒沙门氏菌的实验研究
  9. Experimental research on identification of contact parameters between workpiece and wheel
    砂轮和工件间接触参数识别的实验研究
  10. Experimental Study on Identification of Noise Resources and Noise Reduction of SUV Vehicle
    SUV整车噪声源识别与降低噪声的试验研究
  11. Experimental identification of safety criterion for pressure wave on ears of guinea pigs
    豚鼠耳压力波安全标准的实验验证
  12. Experimental Studies on Identification and Screening of Related Genes of Chordoma by mRNA-DD Method
    mRNA-DD法鉴定、筛查脊索瘤相关基因的实验研究
  13. Experimental Identification of Road Features based on Date Fusion Technique
    基于数据融合技术的道路特征实验识别
  14. A geometrical model of the ball end mill is presented. A method combining theoretical cutting force analysis with experimental identification of milling force coefficients is used to develop the milling force model.
    给出了球头铣刀刃线几何模型,采用理论切削力分析与实验&系数识别相结合的方法建立了新的螺旋刃球头铣刀的铣削力模型。
  15. Experimental investigation on identification vibration and noise sources from electrical motors
    识别电机振动噪声源的试验研究
  16. The experimental identification of the acoustic channel in active noise control
    主动噪声控制声学通道的实验辨识
  17. Experimental identification of the scattered wave in coarse-grained material
    粗晶材料晶粒散射波的实验鉴别
  18. The experimental identification results proved the correctness of the theoretical analysis. The model can be used to design the contact force controller according to different contact stiffness.
    基于建立的谐波驱动系统实验平台,利用动态信号分析仪进行了接触力的模型实验辨识研究,得到从电机驱动器到力传感器输出的动态特性模型,为接触力控制器设计提供参考。
  19. Through comparison experimental identification result with ANSYS simulation result, effectiveness of method in this body to obtain modal parameters is verified, then identification accuracy is more perfect.
    通过比较可以看出应用上述方法对于进行多输入振源部分相关情况下进行系统辨识时,方法是有效的,可以得到模态参数,并且识别结果精度较为理想。看出应用振动台试验的能量大。
  20. Experimental Identification of Dynamic Parameters at Joint of Combined Structure
    组合结构结合部动态参数的实验识别方法
  21. Experimental random loading identification using inverse pseudo excitation method
    逆虚拟激励法随机载荷识别试验研究
  22. Experimental Identification of Torsional Vibration Characteristic of Gear Reducer and Study on Simplifying Dynamic Model
    齿轮减速器扭振特性实验辨识及简化动力模型研究
  23. Ased on the feature that the construction conditions for dam concrete are variable with disturbance of many random factors, a gray-box predictive method combined with mechanism model of heat exchange and experimental identification of parameters is presented.
    针对大坝混凝土施工条件多变,随机因素、干扰多等特点,提出将热学机理模型和参数经验识别相结合的灰色预测法,对大坝混凝土的温控防裂措施进行动态管理。
  24. The mathematical model of the resin trouph temperature feature is obtained by the method of experimental identification and the parameters of PID regulator are also designed in this paper.
    通过实验辨识方法得到了树脂槽热过程数学模型,在此基础上进行了PID调节器参数设计。
  25. The eigenvalues of heat system are identified, and further the problem of fitting pluralistic nonlinear model is transformed into linear regressive problem by mechanism analysis and experimental identification. Curve fitting of the dynamic process and finding its parameters are the premise for system monitor and compen-sate-control.
    结合机理研究和实验分析,辨识热系统特征值,进而把变温过程多元非线性拟合问题转化为多元线性回归问题。
  26. The hybrid genetic algorithm improved by Lamarckian learning mechanism is applied to the experimental modal parameter identification of the continuous miner reducer, and the good results are achieved, which verify the method is accurate and effective.
    将经拉马克学习机制改进后的混合遗传算法应用于连采机装运减速齿轮箱的实验模态参数识别中,取得了良好的效果,实践证明,该方法是准确、有效的。
  27. In the field of astronautical and robot development, motion parameters can not only correct the drifts from Inertial Measurement Unit, but also can act as significant basis for experimental results identification and incident causes judgement.
    在航天、机器人等研究领域中,研究对象的运动参数不仅可以修正其惯性测量单元的漂移,而且可以作为实验结果鉴定及事故原因判定的重要依据。
  28. With the experimental data analysised, the experimental identification of parameters and the device out of manual parameter values are very consistent, which proves the clonal selection algorithm on the drive system parameter identification is accurate.
    对实验数据进行分析可知,实验辨识出来的参数值与器件手册上的参数值非常吻合,从而证明了克隆选择算法对驱动系统的参数辨识是精确的。
  29. Numeric simulation technology and experimental identification method are two effective ways for analyzing vibration and noise of vehicles and engine systems.
    数字化仿真技术和试验识别方法是开展车辆和发动机系统振动噪声分析和控制的有力手段。
  30. The purified MBL purity and existing forms were detected by SDS-PAGE and Western blot. Ligand binding activity of the experimental identification of MBL biological activity.
    通过SDS-PAGE和westernblot检测纯化MBL的纯度及存在形式;同时应用配体结合实验鉴定MBL的活性。